EasyManuals Logo

Nvidia DGX A100 Service Manual

Nvidia DGX A100
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
NVIDIA DGX A100 Service Manual
4. Pull the drive to disconnect from the connector on the riser board, then insert the new drive
into the connector on the riser board.
5. Place the drive against the card and secure by tightening the screw using a Phillips #1 screw-
driver.
9. Install the assembled module on the motherboard by inserting the riser card in its slot.
10.3. Replacing the M.2 NVMe Drive 43

Table of Contents

Other manuals for Nvidia DGX A100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nvidia DGX A100 and is the answer not in the manual?

Nvidia DGX A100 Specifications

General IconGeneral
GPU8 x NVIDIA A100 Tensor Core GPUs
System Memory1 TB DDR4
Storage15 TB NVMe SSD
GPU Memory320 GB total (40 GB per GPU)
CPU2 x 64-Core AMD EPYC 7742
Networking8 x 200 Gb/s InfiniBand or Ethernet
InterconnectNVIDIA NVLink

Related product manuals