NVIDIA DGX A100 Service Manual
7. Install the three air baes, replace the motherboard tray lid and then install the motherboard
tray.
Refer to the instructions in the section Reinstalling the Motherboard Tray.
8. Connect all the cables to the motherboard tray.
9. Install all the power cords.
10. Power on the system and log in.
11. Conrm that the system is healthy.
$ sudo nvsm show health
$ sudo nvsm show ∕systems∕localhost∕memory∕alerts
There should be no new alerts listed.
12. Ship the bad DIMM back to NVIDIA Enterprise Support.
12.3. Replacing the DIMM 55
To Next Page
Loading...
Need help?
General
