Clock calculator design
MPC5777C Clock Calculator Guide, Rev. 1, 12/2018
NXP Semiconductors 7
Figure 7. Buttons
2.2.
Device select
The Device Select tab allows user to choose between MPC5777C_264MHz and MPC5777C_300MHz.
This changes the hardware specification table used by the MPC5777C Clock Calculator. For example,
if MPC5777C_300MHz is selected, PLL1_PHI will shade red starting at 300 MHz rather than 264 MHz.
The structure of the tool remains unchanged, though, since the two MPC5777C versions share the same
architecture, but with different operating speeds.
Figure 8. Device select
To Next Page
Loading...
Need help?
General
