Oce fx3000 User Manual

114
Out of Memory The machine’s memory is full. Fax sending or copy operation in progress
Do one of the following:
 Press Start to send or copy the scanned
pages.
 Press Stop and wait until the other
operations in progress finish, and then try
again.
 Clear the data from the memory. (See Out of
Memory message on page 39 or page 82.)
Printing operation in process
Do one of the following:
 Reduce print resolution. (See Advanced tab
in the Software User’s Guide on the
CD-ROM.)
 Clear the faxes from the memory. (See Out
of Memory message on page 82.)
Output tray
Full
The output tray is full of paper. Remove the paper from the output tray.
Paper Jam
Back
The paper is jammed in the back of
the machine.
See Paper jams on page 118.
Paper Jam
Duplex
The paper is jammed in the duplex
tray.
See Paper jams on page 118.
Paper Jam
Inside
The paper is jammed inside the
machine.
See Paper jams on page 118.
Paper Jam
MPTray
The paper is jammed in the MP tray
of the machine.
See Paper jams on page 118.
Paper Jam
Tray1
Paper Jam
Tray2
The paper is jammed in the paper
tray of the machine.
See Paper jams on page 118.
Replace Fuser It is time to replace the fuser unit. Call Océ Imagistics Authorized Service Center
to replace the fuser unit.
Replace Laser It is time to replace the laser unit. Call Océ Imagistics Authorized Service Center
to replace the laser unit.
Replace PF
Kit1
It is time to replace the paper
feeding kit for the Upper Tray.
Call Océ Imagistics Authorized Service Center
to replace the PF Kit 1.
Replace PF
Kit2
It is time to replace the paper
feeding kit for the optional Lower
Tray.
Call Océ Imagistics Authorized Service Center
to replace the PF Kit 2.
Replace PF
KitMP
It is time to replace the paper
feeding kit for the MP tray.
Call Océ Imagistics Authorized Service Center
to replace the PF Kit MP.
Error Message Cause Action

Oce fx3000 Specifications

General

Brand	Oce
Model	fx3000
Category	All in One Printer
Language	English