To Next Page
K
Kirk WebsterSep 13, 2025
How to unlock menu settings on OHAUS EXPLORER PRO?
- GghunterSep 13, 2025
If you are unable to change menu settings, verify that the Lockswitch is in the Off position and unlock the menu in the Lockout menu.
How to unlock menu settings on OHAUS EXPLORER PRO?
If you are unable to change menu settings, verify that the Lockswitch is in the Off position and unlock the menu in the Lockout menu.
Provides an overview of the Explorer Pro balance and its capabilities.
Lists the key features and benefits of the Explorer Pro balance.
Details essential safety guidelines for operating the balance.
Instructions for safely unpacking the new Explorer Pro balance.
Guidelines for choosing an optimal environment for balance placement.
Steps for connecting power and setting up communication interfaces.
Explains the balance's buttons, display elements, and power control.
Covers accessing and navigating the balance's menu structure.
Details the various weighing modes including Weighing, Parts Counting, Density, and SQC.
Explains how to use the parts counting mode to determine quantity.
Details configuration options for parts counting.
Describes how to perform animal weighing.
Details configuration options for animal weighing.
Instructions for setting reference weight and viewing percentages.
Configuration options for percentage weighing.
Instructions for setting limits and checking items.
How to use the filling application to achieve target weights.
Configuration options for the filling application.
How to perform and read G/N/T measurements.
How to use the feature to track sample changes.
Configuration options for differential weighing.
How to create and use formulations.
Configuration options for formulation.
How to use statistics for data analysis.
How to use SQC for process monitoring.
Configuration options for SQC.
Outlines the four methods for density determination.
Configuration options for density measurements.
Explains the formulas used for solid density calculation.
Procedure for calculating wet density.
Procedures and methods for calibrating the balance.
Settings for language, date/time, contrast, and other display options.
Sets the balance reading averaging level.
Sets the balance stability indicator level.
Sets the balance auto zero tracking level.
Selects available units of measurement for weighing.
Details the settings for serial communication (Baud Rate, Parity, Data Bits, Stop Bits).
Settings for auto-print, interval, stable/numeric data.
Selects which GLP data fields to include in printouts.
Options to Run, Delete, or Delete All library entries.
Controls which menu items are locked or unlocked.
Allows resetting individual menus or performing a global reset.
Shows default values for LFT and Lockswitch settings.
Explains how the lockswitch affects menu access.
Describes the process of applying seals for verification.
How to start the printing process.
Guidelines for cleaning the balance housing and pan.
Lists common symptoms, probable causes, and remedies for balance issues.
Lists and explains different types of errors like Data, Tare, Calibration, RS232, User, Load, and CheckSum.
How to get assistance if troubleshooting fails.
Information on how to order necessary replacement components.
Details items like calibration masses and interface cables.
Lists and describes the commands used for serial communication.
Environmental conditions for balance operation.
Key performance metrics of the balance.
Outlines the conditions and duration of the Ohaus product warranty.
General