Oki B4545 MFP User Manual

101
Operation
Default tray for PC printing
In PC printing mode, the printer driver's tray setting will override the
terminal’s tray setting.
The PC driver will indicate the following to the terminal:
• which tray to use for printing: upper, lower, auto,
• the format of each page: A4, Letter, A5, B5, ...
Your terminal will select the tray requested by the PC, except if the
"Auto tray" option is requested: in that case, your terminal will select
the default tray by itself according to the "Default tray" parameter
setting, i.e. upper, lower or auto, which will come to select the last
tray used on the previous printing session.
The format transmitted for each page by the PC is not taken into
account for tray selection; this information is only used for setting
the printer parameters (should the requested format and the format
physically available be conflicting, the printer will display the error).
Tray selection
on PC side
Default trayon
terminal side
Tray selected
UPPER indifferent UPPER
LOWER indifferent LOWER
AUTO
UPPER UPPER
LOWER LOWER
AUTO tray selected last

Oki B4545 MFP Specifications

Printer

print speed	21 ppm
time to first page	13 seconds
print resolution	600 x 600 dpi
processor speed	92 MHz
duty cycle	12, 500 prints/copies per month

Fax

fax modem speed	33.6 Kbps
transmission speed	2.5 seconds
fax memory	500 pages (8 MB)

System Memory

standard imaging RAM	64 MB

Scanner

scan type	Color and Black & White
scan speed	1.8 sec./pg. Black & White; 16 sec./pg. Color
scan resolution	600 x 2400 dpi

Environmental

dimensions	17.9" x 17.5" x 20.5"
weight	32.0 lb. (14.5 kg)
power consumption	Operating 580W, Idle 20W, Power Save 15W