Operation
92
SAVE
This function prints all your documents duplex.
Remark  : This function requires the prior installation on the rear of your terminal of the duplex 
module and the additional paper tray (option or depending on model).
+ Select WITH or WITHOUT using keys  and.
+ Validate by pressing the OK key.
854 OK - ADVANCED FCT / SCAN. & PRINT / S.F MARGINS
If you want to offset the side margins of your document to the left or to the 
right when scanning with your scroll scanner.
+ Adjust the offset of the left/right margins (in 0.5mm steps mm) using 
keys  and .
+ Validate by pressing the OK key.
855 OK - ADVANCED FCT / SCAN. & PRINT / FLATBED MARG
If you want to offset the side margins of your document to the left or to the 
right when scanning with your flat scanner:
+ Adjust the offset of the left/right margins (in 0.5mm steps mm) using 
keys  and .
+ Validate by pressing the OK key.
856 OK - ADVANCED FCT / SCAN. & PRINT / PRINTER MARG
If you want to offset the side margins of your document to the left or to the 
right.
Adjust the offset of the left/right margins (in 0.5mm steps) using keys 
 and 
.
+ Validate by pressing the OK key.
LOCAL COPY MENU
To manage new copy modes (Mosaic [n-up]/Banner, Identity Card copy) and 
to simplify the local copy menu, you will need to change the order of the 
various options, i.e.:
• ·enter least used options last,
• ·enter as early as possible any options whose selection will condition the absence or 
presence of other options.
The various fields of the local copy menu are described below in order of 
appearance.