Oki B4545 MFP User Manual

75
Operation
Remark : Since the addressee’s number is generally on the document to be trans-
mitted, you may also dial before positioning the document.
From the flat scanner
CHOOSING THE RESOLUTION/CONTRAST
Resolution
You have 4 modes for document transmission.
The mode choice depends on the type of document to be
transmitted:
• Normal mode, to be used for good quality documents, without drawings
or small details
• Fine mode, symbolised by Fine at the bottom of the display screen. To
be used for documents with drawings or small characters
• Super Fine mode, symbolised by SFine at the bottom of the display
screen. To be used for documents with very fine or small character
drawings
• Photo mode symbolised by Photo at the bottom of the display screen.
To be used for photographic documents
To select the resolution mode:
+ Press key as many times as necessary to select the required
mode. A
 icon on the screen shows the current mode.
Contrast
You can set the contrast if your document is too light or too dark. If
the document is light, you must raise the contrast and if it is dark,
you must reduce it.
To set the contrast:
+ Using the handle, lift up the
document feeder tray.
+ Put your document, with the
printed face down on the scanner
window (1). The scanner origin is
located at your end, to the left,
as shown opposite.
+ Once the operation is complete,
lift the document feeder tray and
recover your document.
1

Oki B4545 MFP Specifications

Printer

print speed	21 ppm
time to first page	13 seconds
print resolution	600 x 600 dpi
processor speed	92 MHz
duty cycle	12, 500 prints/copies per month

Fax

fax modem speed	33.6 Kbps
transmission speed	2.5 seconds
fax memory	500 pages (8 MB)

System Memory

standard imaging RAM	64 MB

Scanner

scan type	Color and Black & White
scan speed	1.8 sec./pg. Black & White; 16 sec./pg. Color
scan resolution	600 x 2400 dpi

Environmental

dimensions	17.9" x 17.5" x 20.5"
weight	32.0 lb. (14.5 kg)
power consumption	Operating 580W, Idle 20W, Power Save 15W