Installation
11
• Do not allow water or other liquids to spill on or near the terminal. Fire or electrical shock can
occur should water or liquid come into contact with the terminal.
• Should liquid or any piece of metal accidently get inside the printer, immediately turn it off,
unplug the power cord, and contact your dealer. Failure to take this immediate action creates the
danger of fire or electrical shock.
• Whenever the terminal emits unusually high amounts of heat, smoke, an unusual odor, or noise,
immediately turn it off, unplug it, and contact your dealer. Failure to take this immediate action
creates the danger of fire or electrical shock.
• Paper for printer: do not use paper previously printed by your terminal or any other printer: the
ink or toner deposited on that paper might damage the printing system of your terminal.
Caution - Be sure to locate the terminal in a well-ventilated location. A minimal amount
of ozone is generated during normal operation of this terminal. Because of this, an
unpleasant odor may result when the printer is used for extensive printing in a poorly
ventilated area. For a comfortable, healthy, and safe operation, be sure to locate the
terminal in a well-ventilated area.
Unpacking the box
+ Take the protection profiles, the packing material and the terminal out of the
shipping box.
+ Check that the following parts are in the box.
1 Installation Guide
2Terminal
3 Document Feeder
4Power Cord
5 Printer Output
Stacker
6 Phone Line Cord
7CD-ROM
8Image Drum
Cartridge
9 Toner Cartridge
10 Printer Paper Tray
1
2
3
4
5
6
7
8
9
10
To Next Page
Loading...
