Oki B4545 MFP User Manual

Setting your terminal
51
To configure the local network setting manually:
2531 OK - SETUP / NETWORKS / LOCAL NETWORK /
CONFIGURATION
+ Choose MANUAL and press OK to confirm.
IP address
2532 OK - SETUP / NETWORKS / LOCAL NETWORK / IP
ADRESSE
+ Enter the IP address of your terminal and press OK to confirm.
Sub-network mask
2533 OK - SETUP / NETWORKS / LOCAL NETWORK / SUBNET
MASK.
+ Enter the sub-network mask of your terminal and press OK to confirm.
Gateway address
2534 OK - SETUP / NETWORKS / LOCAL NETWORK /
GATEWAY
+ Enter the IP address of the network gateway and press OK to confirm.
IEEE address (or Ethernet address) or MAC address
2535 OK - SETUP / NETWORKS / LOCAL NETWORK / IEEE
ADRESSE
The Ethernet card of your terminal already has an unmodifiable, yet
consultable, IEEE address.
Netbios names
These names, which can be used with the network options, are used to
identify your terminal from a PC connected to a local network (for instance
with the name "IMP-NETWORK-1").
2536 OK - SETUP / NETWORKS / LOCAL NETWORK /
NETBIOS 1
2537 OK - SETUP / NETWORKS / LOCAL NETWORK /
NETBIOS 2
+ Enter the selected name (15 characters max) and press OK to confirm.
The WINS1 and WINS2 servers, used with the network options, allow access
to terminals on other sub-networks by means of their NetBIOS name.

Oki B4545 MFP Specifications

Printer

print speed	21 ppm
time to first page	13 seconds
print resolution	600 x 600 dpi
processor speed	92 MHz
duty cycle	12, 500 prints/copies per month

Fax

fax modem speed	33.6 Kbps
transmission speed	2.5 seconds
fax memory	500 pages (8 MB)

System Memory

standard imaging RAM	64 MB

Scanner

scan type	Color and Black & White
scan speed	1.8 sec./pg. Black & White; 16 sec./pg. Color
scan resolution	600 x 2400 dpi

Environmental

dimensions	17.9" x 17.5" x 20.5"
weight	32.0 lb. (14.5 kg)
power consumption	Operating 580W, Idle 20W, Power Save 15W