Setting your terminal
55
Choosing NO ACCESS disables access to Internet functions. OK.
92 OK - INTERNET / INIT. PROVIDER
921 OK - INTERNET / INIT. PROVIDER / CONNECTION
+ Enter the CALL NUMB., press OK.
+ Enter connection IDENTIFIER
1
, press OK.
+ Enter connection PASSWORD, press OK.
922 OK - INTERNET / INIT. PROVIDER / MESS. SERV
+ Enter Email IDENTIFIER, press OK.
+ Enter Email PASSWORD, press OK.
+ Enter E-MAIL ADR, press OK.
Access to servers parameters
923 OK - INTERNET / INIT. PROVIDER / SERVERS
+ Enter SMTP, press OK.
+ Enter POP3, press OK.
+ Enter DNS 1 (primary), press OK.
+ Enter DNS 2 (secondary), press OK.
Sample Internet settings for the terminal (56 kbps modem)
Your access provider should give you the following information:
Non-functional data given by way of example.
1. If the identifier has more than 16 characters, the text will automatically slide over to the left.
CALL NUMBER: 08 60 00 10 00
CONNECTION IDENTIFIER: sg048944@wn.net
CONNECTION PASSWORD: *****
MESSAGE SERVICE IDENTIFER: demo jt12
MESSAGE SERVICE PASSWORD: *****
E-MAIL ADDRESS: demo2@gofornet.com
SERVER:
SMTP mail.gofornet.com
POP mail.gofornet.com
DNS 1 103.195.014.001
DNS 2 103.195.014.002
To Next Page
Loading...
