Oki B4545 MFP User Manual

Setting your terminal
42
Defining the local prefix
2522 OK - SETUP / NETWORKS / PREFIX / PREFIX SETTING
+ Enter the outgoing local prefix of the company’s telephone network
(maximum 5 characters) and validate with OK.
Transmission report
You may print a transmission report for all communications over the
telephone network (STN).
You may choose between more than one criteria for printing reports:
• With: a report is given when the transmission was properly performed or
when it is completely abandoned (but there is only one report per
request),
•
Without: no transmission report, however, your fax will note all transmis-
sions that took place in its log (refer to paragraph Logs, page 102),
•
Always: a report is printed with each transmission,
• ON ERROR: a report is printed only if the transmission failed or is abando-
ned.
With each transmission report from memory, a reduced version of the first
page is automatically reproduced.
To select the report type:
231 OK - SETUP / SEND / SEND REPORT
+ Select the required option WITH, WITHOUT, ALWAYS or ON ERROR and
confirm your choice with OK.
Document feed type
You may choose the way you want to feed your documents:
• from memory, transmission will take place only after memory storage of
the document and dialing. It allows you to get your originals back quickly
to free up the terminal.
• from the feeder of the sheet-feed scanner (refer to paragraph Document
depositing, page 74), transmission will occur after dialing. It allows trans-
mission of larger documents.
To select the way you want to feed your documents:
232 OK - SETUP / SEND / MEMORY SEND.
+ Select the option MEMORY or FEEDER and validate your choice with OK.
Remark : in feeder mode, the reduced image will not appear on the transmission report.
Economy period
This function allows you to defer a fax transmission to "off-peak hours" and
thus reduce the cost of your communications.
The economy period, via the telephone network (at off-peak hours), is
preset by default from 7.00 pm to 7.30 am. Nevertheless you may change
this time slot.

Oki B4545 MFP Specifications

Printer

print speed	21 ppm
time to first page	13 seconds
print resolution	600 x 600 dpi
processor speed	92 MHz
duty cycle	12, 500 prints/copies per month

Fax

fax modem speed	33.6 Kbps
transmission speed	2.5 seconds
fax memory	500 pages (8 MB)

System Memory

standard imaging RAM	64 MB

Scanner

scan type	Color and Black & White
scan speed	1.8 sec./pg. Black & White; 16 sec./pg. Color
scan resolution	600 x 2400 dpi

Environmental

dimensions	17.9" x 17.5" x 20.5"
weight	32.0 lb. (14.5 kg)
power consumption	Operating 580W, Idle 20W, Power Save 15W