Oki B4545 MFP User Manual

Operation
104
Setting the terminal for document deposits,
you must define the type:
• SIMPLE- it may be polled only once from the memory or feeder
• MULTIPLE- it may be polled as many times as necessary from the memory
Setting the terminal for polled documents,
you must define the poll number, then depending on the type of poll you
may:
• launch an immediate poll
•program a delayed poll with a chosen time
• launch a multi-poll, either immediately or later.
Placing a document in deposit
+ Insert the document to deposit in the feeder.
+ Select 34 OK - FAX / POLLING TX and confirm with OK.
+ Choose the type, according to the table below:
+ Confirm deposit by pressing the OK key.
Polling a deposited document
33 OK - FAX / POLLING RX
+ Enter the number of the party whose document you want to poll or
choose your dialing mode (refer to paragraph Dialing, page -76).
Remark : you can poll several documents using the key.
Menu Procedure
SIMPLE
+ Select FEEDER or MEMORY
+ If necessary, adjust the contrast and confirm with OK
+ Enter the number of pages that you wish to deposit
MULTIPLE
+ If necessary, adjust the contrast and confirm with OK
+ Enter the number of pages that you wish to deposit

Oki B4545 MFP Specifications

Printer

print speed	21 ppm
time to first page	13 seconds
print resolution	600 x 600 dpi
processor speed	92 MHz
duty cycle	12, 500 prints/copies per month

Fax

fax modem speed	33.6 Kbps
transmission speed	2.5 seconds
fax memory	500 pages (8 MB)

System Memory

standard imaging RAM	64 MB

Scanner

scan type	Color and Black & White
scan speed	1.8 sec./pg. Black & White; 16 sec./pg. Color
scan resolution	600 x 2400 dpi

Environmental

dimensions	17.9" x 17.5" x 20.5"
weight	32.0 lb. (14.5 kg)
power consumption	Operating 580W, Idle 20W, Power Save 15W