Oki B4545 MFP User Manual

Operation
96
This mode only makes sense on the ADF scanner (a document shall include
several pages) and with a number of copies exceeding 1.
For an assembled copy, the document is faxed in 200 dpi fax mode then
encoded (MMR coding) and stored in the flash memory. Once the document
is entirely scanned, it is printed as many times as requested then erased from
the memory.
The resulting limitations are as follows:
• fax mode scan: 8.5 in. (216 mm ) in width, 1728 pixels,
• zoom forced to 100% (for any user selection).
The assembled copy selection is not available in the following cases:
• flatbed scanner: normal, Banner or Identity Card mode,
• ADF scanner with number of copies = 1,
• number of copies > 1, but with a zoom value different from 100%,
• Mosaic mode activated,
• output to a tray with Letter paper.
Resolution selection
Select HIGH SPEED, QUALITY or PHOTO RESOLUTION using keys  or
, then validate the choice with the OK key.
Remark : A Resolution key is also available for immediate selection once the slip is entered.
Contrast selection
+ Adjust the contrast using keys  and, then validate the choice with
the OK key.
Remark : A Contrast key is also available for immediate selection once the slip is entered.

Oki B4545 MFP Specifications

Printer

print speed	21 ppm
time to first page	13 seconds
print resolution	600 x 600 dpi
processor speed	92 MHz
duty cycle	12, 500 prints/copies per month

Fax

fax modem speed	33.6 Kbps
transmission speed	2.5 seconds
fax memory	500 pages (8 MB)

System Memory

standard imaging RAM	64 MB

Scanner

scan type	Color and Black & White
scan speed	1.8 sec./pg. Black & White; 16 sec./pg. Color
scan resolution	600 x 2400 dpi

Environmental

dimensions	17.9" x 17.5" x 20.5"
weight	32.0 lb. (14.5 kg)
power consumption	Operating 580W, Idle 20W, Power Save 15W