Oki B4545 MFP User Manual

95
Operation
Duplex mode (With optional duplex unit installed)
This selection is not available for flatbed copies (page changes are
not managed on the flatbed scanner) or for the Identity Card mode.
Case of a duplex printer (option) with compatible paper type:
Case of a simplex or duplex printer with incompatible paper type:
Zoom selection
This selection is not available for Mosaic/Banner and Identity Card
modes.
For normal mode, the selection principle is as described for the
ZOOM key.
Origin selection
This selection is not available for Mosaic/Banner and Identity Card
modes:
On the ADF scanner, with the sheet being centered by the margin
stops, the default value xxx is not necessarily 000: this value is now
computed automatically once the output format and zoom
coefficient have been selected.
Assembled copy selection (collating)
This mode, also called "sorted copy" mode, can be used for scanning
a complete document on the ADF scanner then for printing this
document n times (in "non-assembled" mode - default setting -,
each scanned page will be printed n times).
1>DUPLEX
->DUPLEX
2 1-SIDE ->DUPLEX
3 DUPLEX ->1-SIDE
4 1-SIDE ->1-SIDE
1>1-SIDE
->1-SIDE
2 DUPLEX
->1-SIDE
ZOOM
100%
ORIGIN
X=XXX Y=000

Oki B4545 MFP Specifications

Printer

print speed	21 ppm
time to first page	13 seconds
print resolution	600 x 600 dpi
processor speed	92 MHz
duty cycle	12, 500 prints/copies per month

Fax

fax modem speed	33.6 Kbps
transmission speed	2.5 seconds
fax memory	500 pages (8 MB)

System Memory

standard imaging RAM	64 MB

Scanner

scan type	Color and Black & White
scan speed	1.8 sec./pg. Black & White; 16 sec./pg. Color
scan resolution	600 x 2400 dpi

Environmental

dimensions	17.9" x 17.5" x 20.5"
weight	32.0 lb. (14.5 kg)
power consumption	Operating 580W, Idle 20W, Power Save 15W