141
Maintenance
Code 1B - Transmission failed
During transmission: start again.
During reception: ask your subscriber to resend the document.
Internet codes
Codes 40 and 41 - No reply from supplier
The modem cannot connect to the Internet service provider. If this error
always occurs, check the supplier’s dial-up number.
Code 42 - Cannot access supplier
The service provider refuses the connection, the service is temporarily
unavailable. If this error always occurs, check the Internet connection
parameters.
Code 43 - Xmission server unavailable
Cannot connect to the SMTP server for sending mail, the service is
temporarily unavailable. If the error always occurs, check the Internet
e-mail and server parameters.
Code 44 - Reception server unavailable
Cannot connect to the POP3 server for mail reception, the service is
temporarily unavailable. If the error always occurs, check the Internet
e-mail and server parameters.
Code 45 - Supplier disconnected
The service is temporarily unavailable; try again later.
Code 46 - Xmission server disconnect
The SMTP server for sending mail is disconnected. The service is
temporarily unavailable- try again later.
Code 47 - Reception server disconnect
The POP3 server for mail reception is disconnected. The service is
temporarily unavailable- try again later.
Code 48 - Disconnection from Internet
The service is temporarily unavailable- try again later.
Code 49 - Cannot connect to Internet
Check the call number and eventually the associated prefix of the
terminal.
To check the Internet parameters, print them by pressing in turn the keys
, 9, 4, 5 and OK.
To Next Page
Loading...
