Oki B6200 Series Setup Guide

INSTALLATION AND RELOCATION PROCEDURE > 23
INSTALLING THE OFFSET CATCH TRAY
You can install an offset catch tray option on this printer.
1. Lift the second lever on the top left corner at the back of the
printer (1), and open the cover (2).
NOTE
An offset catch tray can be installed on the B6300 only.
NOTE
When the duplex unit is installed, lift the lever on top of the left side cover
of the unit and open the unit, then open the cover as shown in the diagram.

Oki B6200 Series Specifications

General

Resolution	1200 x 1200 dpi
Processor	200 MHz
Connectivity	USB 2.0, Parallel
Memory	32 MB (expandable to 288 MB)
Operating Systems Supported	Windows
Print Technology	LED