INSTALLATION AND RELOCATION PROCEDURE > 45
SELECTING THE CONTROL PANEL LANGUAGE
English is the default language for all error and status messages; however,
these messages are also available in many languages. Use the following
procedure to change the display language.
1. Press the <MENU> button to display the Menu screen.
2. Press the < > or < > button until [Display Language] is
displayed, then press the < > button.
3. Press the < > or < > button until the required language is
displayed, then press the <FEED/SELECT> button.
4. Press the <MENU> button to complete the language setting.
NOTE
Refer to the section “The Control Panel and Menu system” on page 43 for a
brief overview of the control panel and its menus and sub-menus.
To Next Page
Loading...
