34 > INSTALLATION AND RELOCATION PROCEDURE
INSTALLING ADDITIONAL MEMORY
The additional memory module for this printer is 512MB.
1. Refer to “Preparing the printer” on page 26.
2. Hold the additional memory so that the notch (1) is aligned with
the protrusion on the slot.
3. Insert the additional memory at an angle (1) and push it into the
printer until it clicks into position (2).
4. Refer to “Closing the printer” on page 27.
CAUTION!
Do not touch the terminal area of the additional memory.
Do not bend or damage the additional memory.
Before handling the memory board, touch something metal in order to
discharge any electrostatic charge built up in your body.
To add more memory when the printer is in use, you need to configure the
memory capacity in the printer driver. For details, refer to the Online Help
for the printer driver.
NOTE
Ensure that the additional memory is firmly inserted.
To Next Page
Loading...
Need help?
General
