Oki B6200 Series Setup Guide

52 > INSTALLATION AND RELOCATION PROCEDURE
6. Make sure the Printer Descriptions folder is selected in the
drop-down box.
7. Highlight your printer model, click Select.
8. Under USB Printer Selection, click Change.
9. Highlight your printer model, click OK.
10. Click Create. The printer icon appears on the desktop.
11. Click Save.
ACTIVATE THE DUPLEX UNIT AND ADDITIONAL OPTIONS
1. Highlight the printer created on the desktop.
2. Select Printer from the desktop menu.
3. Click the Change drop-down menu.
4. Select each option. Click the To drop-down menu and select
Installed. Click OK.
TO PRINT A JOB USING THE OPTIONAL DUPLEX UNIT
1. Select File from the desktop menu.
2. Click Print Desktop from the drop-down menu.
3. Select Layout.
4. Check Print on Both Sides. Click Print.
TO LOAD THE MANUALS
Note: In order to open the on-line manual, you must have Acrobat Reader
installed.
1. Insert the CD into your CD-ROM drive.
2. From the CD contents folder, either open the file directly or drag
the Manual folder to copy them to the desktop.

Oki B6200 Series Specifications

General

Resolution	1200 x 1200 dpi
Processor	200 MHz
Connectivity	USB 2.0, Parallel
Memory	32 MB (expandable to 288 MB)
Operating Systems Supported	Windows
Print Technology	LED