INSTALLATION AND RELOCATION PROCEDURE > 47
SETTING PRINTER CONFIGURATIONS VIA A
WEB PAGE
If you are working in a TCP/IP-enabled environment, you can use a web
browser to display the printer or job printing status and to change the
settings.
Among the printer settings that are made on the control panel, settings for
the system and network ports can be configured under [Printer],
[Network] and Maintenance] on the web page.
1. Boot your computer, and start the web browser.
2. Enter the printer’s IP address or URL in the address input column
on the web browser and press the <Enter> key.
Using Online Help
For details regarding the items that can be set in each screen, click the
[Help] button to display the Online Help.
NOTE
> The web page facility is only available when the printer is connected to
the network.
> Refer to the Reference Guide when the web page does not appear after
carrying out the steps 1 and 2 below.
> You can also use Telnet to set the printer configuration. For details on
the settings, refer to the NIC Configuration Guide.
To Next Page
Loading...
Need help?
General
