INSTALLATION AND RELOCATION PROCEDURE > 49
11. Drivers are copied. Click Finish. If Connect cable screen
displays. Click Finish.
12. Switch your printer ON.
If the New Hardware Found Wizard displays:
13. Win 98: select “Search for the best driver for your device”, select
CD-ROM drive, clear other choices. Click Next twice.
Win XP and Win Me: select “Automatic Search for a better
driver.” Click Next.
14. The driver installs. Click Finish.
PRINT A TEST PAGE
1. From the taskbar, click Start→Settings→Printers (& Faxes).
2. Right-click the printer icon, then click Properties.
3. Click the Print Test Page button.
TO INSTALL THE POSTSCRIPT DRIVER AS WELL
1. With the Software Installation screen open, click the Printer
Driver Installer button.
2. Click Local printer. Click Next.
3. Select the LPT1 port. Click Next. USB Users: select the LPT1
port temporarily.
4. Select your printer model and PS emulation. Click Next.
5. Follow the on-screen instructions. Click Finish.
USB Users:
6. From the taskbar, click Start → Settings → Printers (& Faxes).
7. Right click the PS printer icon, then click Properties.
8. Click on the Details/Ports tab.
9. Select the USB port in the “Print to the following port”
drop-down list.
10. Click Apply, OK. Close the Printers dialog box.
To Next Page
Loading...
Need help?
General
