56 > IF PAPER JAMS
IF PAPER JAMS
Guided by the message on the control panel, open the cover and remove
the jammed paper. If paper is torn, check for any remaining torn pieces of
paper.
The covers and trays are identified in the following diagram:
Cover A: When the optional offset catch tray is installed, fold the tray first
before opening cover A. When a message to remove the drum-toner
cartridge is displayed, refer to “Inside Cover A” on page 58.
CAUTION!
When removing jammed paper, make sure that no pieces of torn paper are
left in the machine. A piece of paper remaining in the machine can cause a
fire. If a sheet of paper is wrapped around the heat roller, or when clearing
a jammed paper that is difficult or impossible to see, do not try to remove
it by yourself. Doing so may cause injuries or burns. Switch off the
machine immediately, and contact your Oki dealer.
CAUTION!
The fuser unit gets hot when operating. Avoid touching it.
To Next Page
Loading...
Need help?
General
