44 > INSTALLATION AND RELOCATION PROCEDURE
NAVIGATING THE CONTROL PANEL MENUS
When you press the MENU button on the control panel, you enter the
printer’s menu system. At that point, the first line of the display contains
the text [Menu], indicating that you are in the menu system. The second
line of the display lists the active menu, which you can change by pressing
the < > or < > button.
Using these buttons repeatedly, you can cycle through the main menus in
the following order: Print Language; Report/List; Meter Reading; Admin
Menu; Display Language.
By using the arrow buttons as indicated above, you can navigate through
the menu system to make any required settings. For example, to set the
paper type in Tray 1 to accommodate recycled paper, navigate as follows:
Admin Menu, Printer Settings, Paper Type, Tray 1, Recycled then press
the <FEED/SELECT> button to record the setting and the <MENU>
button to close the menu screen.
9
<> <> <>
< > buttons
Press these to move to the required menu, item and required
value on the display. Also, press the < > button when you
are carrying out secure/sampled/delayed printing or when
you are checking/printing received mail manually.
Note: When you are changing the candidate values by the
< > < > buttons, you can press and hold down the
buttons to change the display continuously. Also, pressing
the < > < > buttons simultaneously displays the default
values.
Display/Close the Menu
screen
<MENU> button
Switch between the menu
levels
<>
button (moves one level downwards) or < > button
(moves one level upwards)
Switch between menus or
items in the same level
< > button (displays the previous menu or item) or < >
button (displays the next menu or item)
Move the cursor (_) of the
setting value to the right or left
< > button (moves to the right) or < > button (moves to
the left)
Confirm setting <FEED/SELECT> button
No. Name Description
To Next Page
Loading...
Need help?
General
