INSTALLATION AND RELOCATION PROCEDURE > 37
3. Place the drum-toner cartridge on a flat surface and pull out the
seal horizontally.
4. Hold the drum-toner cartridge by the grip and insert it into the slot
inside the printer.
5. Close the cover securely.
CAUTION!
When pulling out the seal, pull it out horizontally. The tape might break if it
is pulled out diagonally.
After the seal has been pulled out, do not shake or bump the drum-toner
cartridge.
CAUTION!
Do not touch any parts inside the printer.
Ensure that the drum-toner cartridge is firmly located.
NOTE
If the offset catch tray is folded as in Step 1, close the cover and then return
the tray to its original position.
To Next Page
Loading...
