Oki mc series User Manual

Appendix A - menu system > 143
Print Setup
(cont.)
System
Configuration
Menu
(cont.)
Auto Continue ON, OFF Determines whether or
not the MFP will
automatically recover
from a memory
overflow condition.
Error Report ON, OFF If ON, the MFP will
print error details
when a PostScript
emulation error
occurs.
PCL Setup Font Source Resident, Resident2 Specifies the location
of the PCL default font.
Font No. I0 ~ I90 Sets the PCL font
number.
Font Pitch 0.44~10.00~
99.99 CPI
Sets the width of the
PCL default font.
Font Height 4.00~12.00~
999.75 point(s)
Sets the height of the
PCL default font.
Symbol Set PC-8 PCL symbol set. If the
font source and
number are changed
to one which does not
support the selected
symbol set, this must
be changed to an
available symbol set
for that font.
A4 Print Width 78 Column,
80 Column
Sets the number of
columns subject to
Auto LF with A4 paper
in PCL. This is the
value when Auto CR/
LF Mode is set to OFF
with the 10CPI
character.
White Page Skip ON, OFF Selects whether blank
pages are printed or
not.
CR Function CR, CR+LF Selects whether a
received carriage
return character (0Dh)
also causes a line
feed.
LF Function LF, CR+LF Selects whether a
received line feed
character (0Ah) also
causes a carriage
return.
Print Margin Normal,
1/5 inch, 1/6 inch
Sets the non-printable
page area. Normal is
PCL compatible.
True Black ON , OFF Selects whether black
image data is printed
using black toner (True
Black ON) or 100%
CMY. (Valid in PCL
emulation mode only.)
ITEM OPTION VALUE/DESCRIPTION

Oki mc series Specifications

General

Brand	Oki
Model	mc series
Category	All in One Printer
Language	English