Oki mc series - Setting the E-mail Address for Your Machine

Configuring the network settings > 26
S ETTING THE E- MAIL ADDRESS FOR YOUR MACHINE
Enter an E-mail address to be used by your machine in the "Setup Information Form," on
page 9.
> If the E-mail address for your machine is specified by the network administrator,
enter the email address in B-1.
> If you are using an Internet Service Provider, obtain an E-mail address for your
machine from the provider and then enter the E-mail address in B-1.
> If the E-mail address for your machine is neither specified nor obtained, determine
the E-mail address according to the value you entered in authentication method:
> If authentication method is “SMTP”, determine an E-mail address and enter it
in B-1.
> If authentication method is “POP”, enter the same E-mail address as B-12 in
B-1.
NOTE
If you want your machine to receive E-mail, you must obtain an E-mail
address for your machine from a network administrator or your Internet
Service Provider.