Advanced network settings > 97
Using PEAP:
a) Select Disable for IEEE802.1X.
b) Select PEAP for the EAP Type.
c) Enter a user name in EAP User.
d) Enter the password in EAP Password.
e) Select Authenticate Server and then click Import.
f) Enter the file name of the CA certificate and then click OK.
g) Specify the certificate issued by the certificate authority, which is the certificate
authority from which the RADIUS server obtained the certificate. A PEM, DER, and
PKCS#7 file can be imported.
h) Click Send.
i) When the main unit comes online, proceed to "Wireless LAN settings".
W
IRELESS
LAN
SETTINGS
1. Log in as the administrator.
2. Click the Network Manager tab.
3. Click the Wireless LAN Settings menu.
4. In the Basic Settings field under Network Connection, select Wireless.
5. Enter the SSID name of the wireless AP that you want to connect to in SSID.
6. In the Security method, select the same security setting as the wireless AP that
you want to connect to.
Depending on the selected security method, configure one of the settings from (1)
to (3) below.
When Disable is selected, press the Send button at the bottom left of the Web
screen. (Not recommended for security reasons.)
NOTE
When
WPA-EAP
or
WPA2-EAP
is set for the security method and
EAP-TLS
is
selected as the
EAP Type
,
Not authenticate Server
cannot be selected.
MEMO
The default is "Disabled".
MEMO
"default" is set as the default.
To Next Page
Loading...
Need help?
General
