Configuring the network settings > 37
M
ANAGING
THE
ADDRESS
BOOK
S
ETTING
SENDER
AND
REPLY
TO
E-
MAIL
ADDRESSES
(
FROM
/
REPLY
TO
)
You can set the E-mail address from which E-mails are sent and the address to which
responses are sent.
1. Press the SETTING button.
2. Using the Down arrow key, scroll to Admin Setup and then press OK.
3. Using the arrow keys and on-screen keyboard, enter the administrator password.
4. Select Enter and then press OK.
5. Using the Down arrow key, scroll to Scanner Setup and then press OK.
6. Using the Down arrow key, scroll to E-mail Setup and then press OK.
7. Using the Down arrow key, scroll to From/Reply to and then press OK.
8. Using the Down arrow key, scroll to E-mail Sender ID and then press OK.
9. Using the on-screen keyboard, enter the E-mail address up to 80 characters.
10. Select Enter and then press OK.
11. Using the Down arrow key, scroll to Close and then press OK.
12. Press the RESET/LOGOUT button.
NOTE
The default password is “aaaaaa”.
MC562dn/MC562w/MC562dw/ES5462 MFP/ES5462dw MFP/MPS2731mc only:
You can also use the qwerty keyboard to enter details.
NOTE
MC562dn/MC562w/MC562dw/ES5462 MFP/ES5462dw MFP/MPS2731mc only:
You can also use the qwerty keyboard to enter details.
NOTE
You can select E-mail addresses from the address book.
To Next Page
Loading...
Need help?
General
