Configuring the Scan to Computer and Remote Scan > 48
Using Windows FAX and Scan
“Windows FAX and Scan” is a function used in Windows Vista/ 7/ 8.
1.
Place your document with text face up in the ADF or face down on the document glass
.
2. Press the SCAN key.
3. Press the to select Remote Scan and then press OK.
4. Click Start on your computer, and select All Programs > Windows FAX and Scan.
5. Click New Scan.
6. Select MC5(3)x2/ES5(3)4x2 (for MC332dn, MC342dn, MC342dw, MC352dn, MC362dn,
MC362w, MC562dn, MC562w, MC562dw, ES3452 MFP, ES5462 MFP, ES5462dw MFP) or
MPS2731mc (for MPS2731mc) and click OK.
7. Make additional setting if necessary.
8. Click Scan.
9. Exit Windows FAX and Scan.
U
SING
ICA D
RIVER
The ICA driver is not compatible with the Windows OS.
The ICA driver supports the Mac OS X 10.6/10.7/10.8.
Start to read
1.
Place your document with text face up inthe ADF or face down on the document glass.
2. Press the Scan key on the control panel.
NOTE
When the "PC Scan Mode" is set to Manual Scan Mode or Secure Scan Mode,
implement steps 2 and 3.
NOTE
Some examples of image capture are used in the following procedure. The
steps and menus may differ depending on the application you use.
NOTE
When the "PC Scan Mode" is set to Manual Scan Mode or Secure Scan Mode,
implement steps 2 and 3.
To Next Page
Loading...
Need help?
General
