Appendix A - menu system > 151
Management
Default Mode
Copy
, Scan, Print, Fax*
* MC342dn, MC342dw,
MC362dn, MC362w,
MC562dn, MC562w,
MC562dw, ES5462
MFP, ES5462dw MFP
and MPS2731mc only.
Operation
Clear
Operation Timeout
After 1 ~
3
~ 10 minutes
Clear After Job ON, OFF
Sound
Control
Key Touch Tone Volume
OFF, Low,
Middle
, High
Select key touch
volume level.
Fax Buzzer Volume
OFF, Low,
Middle
, High
Select volume level.
Local
Interface
USB Menu
Soft Reset:
Speed:
USB PS_Protocol:
Offline Receive:
Serial Number:
Enable, Disable
480Mbps, 12 Mbps
ASCII, RAW
Enable, Disable
Enable, Disable
Default settings listed,
these can be changed
if required.
System
Setup
Access Control PIN, User/Password,
Disable
Enable access control
to restrict usage to
authorised user only.
User Authentication Method Local, LDAP,
Secure Protocol
Unit Of Measure Inch, Millimeter
Select unit of measure.
Date Format mm/dd/yyyy,
dd/mm/yyyy,
yyyy/mm/dd
Select desired date
format.
Allow All Reports To Print Enable, Disable Enable/disable report
printing.
Near Life LED Enable, Disable Enable/disable near
life LED.
Near Life Status Enable, Disable Enable: Display a
near-life warning.
Disable: Do not
display a near-life
warning.
Address Information Lock
Time Out
1
~
30
~
60
minute(s)
Enter time-out
duration.
USB Memory Interface Enable, Disable Select disable to turn
off scan to USB
function.
Panel Contrast -10 ~ 0 ~ +10 Adjust the LCD panel
contrast.
ITEM OPTION VALUE/DESCRIPTION
To Next Page
Loading...
