Appendix A - menu system > 153
Management
(cont.)
Storage
Maintenance
Setup
(cont.)
Initial Lock Enable, Disable Enable/disable initial
lock.
Encryption
Setup
Job Limitation Disable,
Encrypted Job Only
Enable/disable
limitation setting.
Language
Maint Setup
Initialize Execute Making changes will
automatically restart
the system.
Admin
Password
New Password user defined Enter new password.
Retype your password
when prompted to
verify.
Note: password must
be six characters or
more.
Enter Password (Verify) user defined
Reset Settings Execute Continuing will
automatically restart
the system.
Job Log
Setup
Save Job Log Enable, Disable
Clear Job Log Execute
Print
Statistics
Supplies Report Enable, Disable
Indication of frequency
of consumable
exchange/non
indication is set.
Reset Main Counter Execute Zeros the counter.
Reset Supplies Counter Execute
User Install Time Zone 00:00 Range: -12:00 to
+12:00 minutes in 15
minute increments.
Set Daylight Saving ON, OFF
Enable/disable daylight
saving setting.
Time Setup Auto Setup
SNTP Server (Primary):
SNTP Server (Secondary):
user defined
user defined
Set todays date and
time automatically.
Manual Setup
Date:
Time:
user defined
user defined
Enter todays date and
time using the keypad.
Use the arrow keys to
move between digits.
Power Save Power Save Enable ON, OFF Enable/disable power
save mode.
Sleep ON, OFF Enable/disable sleep
mode.
Auto Power Off Enable, Auto
Config, Disable
Sets the behavior of
automatic power off.
High Humid Mode ON, OFF If moistened paper is
curled significantly
after printing, change
the setting to ON.
Note: Moistened paper
means paper that has
been left in a high-
humidity environment.
ITEM OPTION VALUE/DESCRIPTION
To Next Page
Loading...
