Maintenance > 126
11. Insert the left end of the cartridge into the top of the image drum unit first, pushing
it against the spring on the drum unit, then lower the right end of the cartridge down
onto the image drum unit.
12. Pressing gently down on the cartridge to ensure that it is firmly seated, push the
coloured lever (1) towards the rear of the MFP. This will lock the cartridge into place
and release toner into the image drum unit.
13. Close the top cover and press down firmly so that the cover latches closed.
14. Gently lower the scanner.
To Next Page
Loading...
Need help?
General
