Appendix A - Moving and transporting > 180
(i) Using the tool provided (2), lock the scanner at the two locations as shown.
(j) On the touch screen, press Enter.
(k) Press the SETUP button on the control panel.
(l) On the touch screen, press Shutdown.
(m) On the touch screen, press Yes to confirm shutdown.
2. Turn off the MFP and disconnect or remove the following:
> Power cord, earth wire
> Printer cable
> Paper in the paper cassette
3. Pull the lever (a) firmly to release the lock and then gently raise the scanner (b).
b
a
To Next Page
Loading...
