Operation > 89
1Others
(cont.)
FPolling OFF, ON To turn ON, use the numeric keypad to
enter the sub-address of the remote
machine.
If required, use the numeric keypad to
enter the password of the remote
machine.
F-Code Tx OFF, ON F Code transmission is a function to
communicate using sub addresses or
passwords in accordance with the
standard of ITU-T. by creating and
registering F Code boxes you can
execute confidential communication and
notice board communication.
Use the numeric keypad to enter the
sub-address.
If required, use the numeric keypad to
enter the password of the remote
machine.
Note: up to 20 F code boxes can be
registered, Up to 30 documents can be
stored in one box.
Note: Polling and FPolling must be OFF.
Memory Tx OFF, ON Select OFF to enable real time
transmission, i.e. fax transmission
synchronisation with scanning.
Dialling
Options
user defined Use the numeric keypad to enter the fax
number. Allows you to add a prefix,
pause, tone, etc., for example if you are
dialling an “extension” number, add a
pause between destination number and
the extension number.
Press the Regist button to assign a fax
number to the speed dial list.
Auto Rx OFF, ON Your MFP is set to receive faxes
automatically, if you wish to change this
to manual receive select OFF.
Logout If access control is enabled, logout once
you are finished to avoid any
unauthorised access.
NO. FEATURE OPTION DESCRIPTION
1
2
3
4
5
6
To Next Page
Loading...
Need help?
General
