Oki Microline 3390 - Setting up the Printer; Removing the Transport Packing

Chapter 1: Assembling and setting up
1-3
• all reasonable precautions have been taken to prevent damage
to the power cable. Do not place objects on the cable and make
sure it is routed so that nobody walks on it or trips over it;
• that a damaged cable is replaced immediately;
• you have removed the mains plug from the socket to ensure
complete isolation from the power supply. The socket provided
for this must be located close to the printer and easily accessible.
Setting up the printer
Removing the transport packing
1. If a clear protective film is at-
tached to the cover of the
printer, you can remove this.
2. Open the cover of the printer
and remove the transport
packing. Make sure you
keep this with the other
packing material in case you
have to transport the printer
later on.