Chapter 3: Paper handling
3-8
Feeding continuous
paper from the rear
(internal tractor)
4. Insert a sheet of paper into
the paper support and adjust
the rails of the paper guide
so that they just touch the
edges of the paper. Start by
aligning the left edge of the
paper to the mark provided.
The paper is automatically
fed into the printer after the
time set in the menu.
☞ Note!
The left edge of the paper must be no more than 1.2 cm from
the end of the platen.
5. Redefine the top of form if necessary by means of the »Top Of
Form« function as described further on.
Paper feed: continuous paper
Long lists and large printing jobs are typical applications for contin-
uous paper, which can be fed in from the bottom or rear of the
printer as required.
1. Move the paper lever on the
right of the printer to the
»Continuous paper, REAR«
position.
To Next Page
Loading...
