Chapter 2: A guided tour of the printer
2-7
Button functions in
menu mode
In this mode, you can adjust the printer to your individual require-
ments. The functions you select are automatically activated when
you switch on the printer.
The alterations you make in the printer menu are stored in the
printer and consequently become standard settings. They can how-
ever be changed again by software commands, via the operator
panel or by resetting the menu.
The menu options and how to use the menu are described in detail
in Chapter 4.
Print functions
Basic print functions can be adjusted by means of the function but-
tons described below. To do this, press the appropriate button until
the required indicator lamp lights. You can change the functions in
both ON LINE and OFF LINE mode.
In order to change a print function such as »Print Quality« (font
type) or »Character Pitch« (character width), press the correspond-
ing button until the setting you require is lit.
This part of the operator panel always indicates the current printer
status. If a function is affected by a programming command, the
associated display is also changed.
To Next Page
Loading...
