Oki Microline 3390 - Page 327

Appendix E: Paper formats and print areas
E-3
bb
c
a
d
Horizontale Perforation
a = 19,5 mm
b = 6,35 mm
c = 50,8 mm
d = 3 to 4 mm
Horizontal Perforation
Within a range of 1 to 2 mm there must not be any hole at the top or
lower edge of the paper.
Vertical Perforation
If a vertical perforation is within the print area adjust the printer so
that you do not print 6.35 mm to the left and right of the perforation
(b). Avoid holes at the intersection of vertical and horizontal perfo-
ration.
Horizontal Perforation