Chapter 6: Consumables and cleaning
6-2
Lift cassette over the print head
Inserting a new
ribbon cassette
4. Hold the used ribbon cas-
sette at the top and carefully
lift it over the print head.
The original ribbon cassettes of the manufacturer´s are specially de-
veloped for your printer. Among other things, this concerns the ink,
which contains lubricants, and the fabric of the ribbon.
Warning!
Non-original ribbons can damage the print head.
Use only the original ribbons of the manufacturer.
A clear ribbon guard is fitted to the front of the cassette. Do NOT
remove it!
1. Take the ribbon out of its plastic packing.
2. Place the cassette with the
cutout sections onto the pins
of the cassette holder.
To Next Page
Loading...
