Oki ML1120 User Manual

ML1120/ML1190 eco User’s Guide – Troubleshooting > 91
Broken and uneven
vertical lines.
This may happen in
bidirectional printing.
Use Print Registration in
the adjustment mode to
adjust.
Too large or small line
spacing.
Line spacing is not
selected correctly.
Reselect line spacing
correctly in the
application.
Split print
Blanks appear in
graphic printout.
This is a paper feed
error, which is especially
notable in printing
regular characters.
This is not a failure.
Blanks or deformed
characters appear in
double height type or
other extended types.
This is a paper feed
error due to line feeding
in printing a single
character.
This is not a failure.
Use the printer's built-in
fonts when you print
important documents or
bills.
Improper cut sheet feed
No paper feed. Sheets are located off
the paper guide.
Load sheets with their
left edges against the
paper guide.
Sheets are not loaded
to the end.
Load sheets to the end.
The platen rotates
without paper feed, or
continuous forms
instead of cut sheets
are fed.
Sheets are not loaded
to the end.
Load sheets to the end.
The printer is in the
continuous forms mode.
Eject the continuous
forms and select cut
sheet mode for the
printer.
Paper distortion. Sheets are not loaded
to the end, or they are
not inserted straight.
Load sheets to the end.
Paper with wrinkles
folds or other defects.
Change paper.
Paper not specified for
the printer.
Use paper types
specified for the printer.
Unable to eject. The LF/FF button is
pressed.
Press the LOAD/EJECT
button.
PROBLEM CAUSE ACTION

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \