Oki ML520 User Manual

Paper Out Override
No Yes
Print Registration
O 0.05 mm Left 0.10 mm Left 0.15 mm Left 0.20
mm Left 0.25 mm Left 0.25 mm Right 0.20 mm
Right 0.15 mm Right 0.10 mm Right 0.05 mm
Right
Operator Panel Function
Full Operation Limited Operation
Reset Inhibit
No Yes
Print Suppress Effective
Yes No
Auto LF
No Yes
Auto CR * * * *
No Yes
CSF Bin Select * * *
Bin 1 Bin 2
Print DEL Code * *
No Yes
SI Select Pitch (10 CPI) * *
* *
17.1 15 cpi
SI Select Pitch (12 CPI) * *
* *
20 12 cpi
Time Out Print
Valid Invalid
Auto Select
No Yes
Printhead Gap Adjust
0 - 1 + 1
* Model 521 only
* * Appears only when Microline emulation is selected
* * * Appears only when optional Cut Sheet Feeder is installed
* * * * Appears only when IBM Proprinter emulation is selected
* * * * * Appears only when Epson LQ emulation is selected
* * * * * * Appears only when optional Serial Interface is installed
* * * * * * * Appears only when optional Roll Paper Stand is installed
Factory default settings are printed in Bold Italic .

Oki ML520 Specifications

General

Brand	Oki
Model	ML520
Category	Printer
Language	English