Olimpia splendid S1 E 8 - 3. BASIC FUNCTIONS; 3.1. Switching the unit on and off (On;Off); 3.2. Selecting a menu

8
Page Content Paragraph
1
T HP max 7.19.
Cool run time 7.20.
Heat run time 7.21.
Page Content Paragraph
1
Temp. unit 8.2.
On/o memory 8.3.
Beeper 8.4.
Back light 8.5.
Time&Date 8.6.
2
Language 8.7.
WiFi 8.8.
2.5. Commission (Parameter)
2.6. General
To switch the unit on or off, press the flag shown in the
figure; once this is done, the system will ask for con-
firmation of the switching on or off through another
window where the on/off command can be confirmed
or cancelled.
16:41
2017-05-04 Fri.
Function Parameter View Commission General
3. BASIC FUNCTIONS
3.1. Switching the unit on and o (On/O)
NOTES:
1. Once the voltage supply has been connected for
the first start-up, this function will be set on “Off”.
2. If the relative function is activated (paragraph
8.3), the value of this parameter will be stored
in the memory and automatically reset after any
possible voltage failure.