Configuring the Printer8-174
Item Description
[IP Address Setting
Method]
Select the automatic assigning method for the
machine IP address.
Choices: [DHCP], [BootP], [ARP/PING]
" The [Auto IP] check box is selected
and cannot be cleared.
Default: [DHCP]
Configuration menu equivalent:
[Admin Settings] - [Ethernet] - [TCP/IP] -
[DHCP] / [BOOTP] / [ARP/Ping]
[IP Address]* Specify the machine's IP address.
Format: *.*.*.* (The asterisks (*) indicate numbers
between 0 and 255.)
Default: [0.0.0.0]
" If the specified IP address is outside of
the allowable range, the value is not
changed, even after [Apply] is clicked.
Instead, the setting returns to the pre-
vious value.
Configuration menu equivalent:
[Admin Settings] - [Ethernet] - [TCP/IP] -
[IP Address]
[Subnet Mask] * Specify the machine's subnet mask address.
Format: *.*.*.* (The asterisks (*) indicate numbers
between 0 and 255.)
Default: [0.0.0.0]
" If the specified subnet mask address
is outside of the allowable range, the
value is not changed, even after
[Apply] is clicked. Instead, the setting
returns to the previous value.
Configuration menu equivalent:
[Admin Settings] - [Ethernet] - [TCP/IP] -
[Subnet Mask]
To Next Page
Loading...
Need help?
General
