Configuring the Printer 8-175
[Default Gateway] * If a router is used on the network, specify the
router's address.
Format: *.*.*.* (The asterisks (*) indicate numbers
between 0 and 255.)
Default: [0.0.0.0]
" If the specified router address is outside of
the allowable range, the value is not
changed, even after [Apply] is clicked.
Instead, the setting returns to the previous
value.
Configuration menu equivalent:
[Admin Settings] - [Ethernet] - [TCP/IP] -
[Gateway]
[Domain Name Auto-
matic Acquisition]
Select whether or not the default DNS domain
name is automatically acquired from the DHCP
server to overwrite the current setting.
Choices: [Enable], [Disable]
Default: [Enable]
[DNS Server Automatic
Acquisition]
Select whether or not the DNS server address is
automatically acquired from the DHCP server to
overwrite the current setting.
Choices: [Enable], [Disable]
Default: [Enable]
*Always enter these addresses without leading zeros. For example,
131.011.010.001 should be entered as 131.11.10.1.
Item Description
To Next Page
Loading...
