Configuring the Printer8-184
[POP Before
SMTP]
[POP Before
SMTP]
If [Enable] is selected, POP before SMTP
is enabled.
Choices: [Enable], [Disable]
Default: [Disable]
[POP Before
SMTP Time]
Specify the length of time after logging on
to the POP server that the SMTP server is
accessed.
Range: 0 to 60 (seconds)
Default: 5
[SMTP
Authentica-
tion]
[SMTP Authentica-
tion]
If [Enable] is selected, SMTP authentica-
tion is enabled.
Choices: [Enable], [Disable]
Default: [Disable]
[Account] Type in the account name used with
SMTP authentication.
Range: Up to 255 characters
Default: [Blank]
[Password] Select [Change Password] to change the
password.
Type in the password used with SMTP
authentication.
Range: Up to 128 characters
Default: [Blank]
[Domain Name] If [Digest-MD5] is selected as the SMTP
authentication method, specify the realm.
Range: Up to 255 characters
Default: [Blank]
*Always enter these addresses without leading zeros. For example,
131.011.010.001 should be entered as 131.11.10.1.
Item Description
To Next Page
Loading...
