Olivetti OFX 550 - ONLY YOUR NAME AND YOUR FAX NUMBER ARE MISSING

7
If in any operating phase two minutes pass with-
out you entering any data, the fax machine will
automatically go back to its initial waiting mode.
Remember that the waiting mode indicates the con-
ditions of inactivity the fax machine is in.
ONLY YOUR NAME AND YOUR FAX NUMBER
ARE MISSING ...
Once set, the name and number (sender identification)
will remain unchanged, unless modified, and both will
appear on every fax page transmitted.
Setting your name ...
Procedure DISPLAY
1
Press the FUNCTION
key until the display
shows --->
INSTALLATION
2
Press the START key. TEL. LINE SET-UP
3
Press the FUNCTION
key until the display
shows --->
STATION NAME
4
Press the START key. TYPE YOUR NAME
_
You can enter a maximum of 16 characters by select-
ing them, one by one, using the numeric keys. Each
numeric key selects cyclically the characters present
in its repertory (see on the right hand side of the
console), starting from the numeric character and
proposing the next character each time it is pressed.
By pressing the keys * and # you can enter a variety of
symbols in your name, e.g. &.
If you want to enter an empty space, simply move the
cursor using the > key without entering any character.
For example, to enter the name "LARA":
Procedure DISPLAY
5
Press the 5 key until
the letter "L" has been
selected.
TYPE YOUR NAME
L
6
Press the > key. The
cursor moves forward
of one position.
TYPE YOUR NAME
L_
7
Press the
2
key until
the letter "A" is
displayed.
TYPE YOUR NAME
LA_
Continue in the same way until your name is completed,
then check its correctness by scrolling the cursor (keys
</>) along the characters.
If there is an error, position the cursor on the wrong
character and overwrite the correct character; if you
want to cancel the name completely, press CLEAR.
8
Press the START key
to confirm the name.
PHONE NUMBER
Setting the fax number ...
Procedure DISPLAY
9
Press the START key. TYPE YOUR NUMBER
_
10
Enter your fax number
(max. 20 digits), by
pressing, one by one,
all the numbers
e.g.:620103.
To enter a space, press
the > key.
TYPE YOUR NUMBER
620103
If you make a mistake, correct it as described in
"setting the name".
When setting the number, you want to enter the
international code, instead of zeros, press the * key;
the display shows the symbol +. This symbol will be
printed before your fax number on each page trans-
mitted.
11
Press the START key
to confirm the number.
DIAGNOSTICS
12
Press the STOP key to
restore the fax to the
initial waiting mode.
AUTOMATIC RX
21-05-99 10:32
Name and fax number position ...
The information in the heading of the document to be
transmitted (name, fax number, date and time and number
of pages) can be shown either outside the text area, just
below the upper edge of the page, or inside the text area
and slightly lower down.
Your fax machine has been set up to transmit this infor-
mation within the text area.
-1--1-10.p65 02/04/01, 9.177