66
OTHER ACOUSTIC SIGNALS ...
1 second short tone
• Transaction was carried out correctly.
20 second intermittent tone
• Prompt to lift the receiver to answer a telephone call.
OTHER MESSAGES ON DISPLAY ...
Message: “CHECK PRINT OUT”
"1=EXIT 0=REPEAT"
The fax machine has automatically tested the print head
nozzles with the subsequent print test: from the test, check
whether print quality is acceptable and reply accordingly.
Message: "CONNECTING"
The fax is carrying out the connection with your remote
party fax machine.
Message: "DIALLING"
The fax is dialling the remote party.
Message: "DOCUMENT READY"
You have correctly inserted the document in ADF.
Message: “LAST TX OK”
The last transmission was completed correctly.
Message: "LIFT HANDSET"
The remote party has booked a voice communication: lift
the receiver to answer the call.
Message: "LINE ON HOLD", "PRESS HOLD"
You have temporarily “held” a telephone conversation by
pressing the " " (HOLD) key: press the " " (HOLD) key
to talk your remote party again.
Message: "MEMORY tx"
You have set a transmission from memory
Message: "NEW PRINT HEAD ?", "1=YES 0=NO"
You have inserted a disposable print head for the first time
or removed and then reinserted it: answer appropriately. If
you answer “yes” but the print head is not new, the fax
machine will not detect the end of ink condition.
Message: "POLL RX HH:MM"
You have carried out a transmission request (Polling re-
ception).
Message: “PRINTING REPORT”
The fax machine is printing a report or a list.
Message: "RECEIVING FAX"
A reception is under way.
Message: "RX COMPLETED"
The reception was carried out successfully.
Message: “RX INTERRUPTED”
You interrupted the reception by pressing the STOP key.
Message: “STORING”
The fax machine is storing the pages making up the
document to be copied.
Message: “TEL CALL”
You connected to the line by lifting the handset of the
connected telephone.
Message: “TRANSMITTING”
A transmission is under way.
Message: "TRANSMITTING..."
A transmission is in progress.
Message: “TX AT HH:MM”
You have set a transmission for a preset time (delayed
transmission).
Message: “TX COMPLETED”
The transmission was completed correctly.
Message: “TX INTERRUPTED”
You interrupted the transmission by pressing the STOP
key.
-8-55-66.p65 02/04/01, 9.2366
To Next Page
Loading...
