Olivetti OFX 550 - Transmitting;Receiving a Document with the Polling Facility; What Is Polling; Making the Transmission Request (Polling for Reception)

53
TRANSMITTING/RECEIVING A DOCUMENT
WITH THE POLLING FACILITY ...
What is polling ...
It is a transmission request from one fax machine to
another so that the latter transmits the requested docu-
ment automatically.
The main characteristics of polling communications are:
• the user receiving the document who requests
the transmission. This means that a user may con-
nect to another fax machine and make it send him a
document automatically (preset) even if there is no
user at the other end of the line.
• the transaction is charged to the party who re-
quests the transmission (i.e.: the user who re-
ceives the document and not to the sender).
Making the transmission request (polling
for reception) ...
Agree with your remote party the time at which the docu-
ment is to be polled so that he inserts the document to be
transmitted. Then set your fax machine to receive the docu-
ment, programming the dialling method to be used to call
the remote party and the time at which the document is to be
received.
Procedure DISPLAY
1
Make sure that the
display shows the initial
waiting mode with date
and time.
AUTOMATIC RX
22-03-99 15:10
2
Press the FUNCTION
key until the display
shows --->
POLLING RX
3
Press the START key.
The display asks you
the time you want to
request the
transmission, e.g.
"17:15".
TYPE TIME
HH:MM
4
Press the START key
to confirm the current
time, or enter the new
time and then press the
START key.
TYPE FAX NUMBER
NUM/TOUCH/SPEED
5
Dial the number of the
remote party in one of
the modes allowed. For
example, enter directly
the number on the fax
numeric key pad.
TYPE NUMBER
02 458629
6
Press the START key
to confirm the setting.
The fax machine
returns automatically to
the initial waiting mode.
AUTOMATIC RX
POLL RX 17:15
-7-46-54.p65 02/04/01, 9.2353