Olivetti OFX 550 - Changing;Deleting a Previously Set Polling Reception Operation; Programming the Fax Machine to Poll a Document (Polling in Transmission)

54
Changing/deleting a previously set polling
reception operation ...
Procedure DISPLAY
1
Make sure you have
set a polling
reception.
AUTOMATIC RX
POLL RX 17:15
2
Press the FUNCTION
key until the display
shows --->
POLLING RX
3
Press the START key. ALREADY ENTERED
4
Press the START key. CHANGE PARAM.?
If you want to cancel a polling reception operation that
has already been set, press the > key: the message
"CANCEL SETTING?, is displayed; then
press START to confirm cancellation. The fax machine
returns automatically to the initial waiting mode.
If you want to change the time at which the
transmission request is to be made or the number of
the remote party from whom you want to receive the
document, proceed as follows:
5
Press the START key. TYPE TIME
HH:MM
6
Ovewrite the new time
and then confirm the
setting with the
START key or confirm
the existing one by
pressing directly the
START key.
TYPE NUMBER
0125 45686
7
Overwrite the new
number and confirm the
setting with the START
key or confirm the
existing one by
pressing directly the
START key. The fax
returns automatically to
the intial waiting mode.
AUTOMATIC RX
POLL RX 18:00
Programming the fax machine to poll a
document (polling in transmission) ...
Procedure DISPLAY
1
Make sure that the
display shows the initial
waiting mode with date
and time.
AUTOMATIC RX
22-03-99 15:10
2
Insert the document in
ADF.
DOCUMENT READY
ê
NORMAL
3
Select the contrast and
resolution type you
consider most
appropriate.
4
Press the FUNCTION
key until the display
shows --->
POLLING TX
5
Press the START key
twice.
AUTOMATIC RX
POLLING TX SET
You can cancel the polling setting during transmission,
by removing the document from the ADF or pressing
the STOP key.
-7-46-54.p65 02/04/01, 9.2354